XS Scuba Worthington Aluminum Cylinder/Tank

Worthington Cylinders entered the scuba cylinder market in 2005 with the introduction of the X-Series and LP-Series steel cylinders manufactured in their Tilbury, Canada facility. Worthington hot dip galvanized cylinders have become the cylinder of choice for serious divers.

Availability: In stock

AED450.00

* Required Fields

XS Scuba

The Best Scuba Gear at the Best Price!

Secure & Safe Shopping with SSL encrypted connection

Fast and Safe Delivery within GCC (UAE, Bahrain, Iran, Kuwait, Oman, Qatar, Saudi Arabia)

Hassle-Free Cash-on-Delivery within whole UAE

7 Day Return Policy for guaranteed quality





Details

Details

XS Scuba Worthington Aluminum Cylinder/Tank

Worthington Cylinders entered the scuba cylinder market in 2005 with the introduction of the X-Series and LP-Series steel cylinders manufactured in their Tilbury, Canada facility. Worthington hot dip galvanized cylinders have become the cylinder of choice for serious divers. 

Worthington acquired the assets of Hymark cylinders in 2010 providing them entry into the aluminum cylinder market. Worthington aluminum cylinders are manufactured in a 225,000 square foot, state-of-the-art facility in New Albany, Mississippi. Worthington manufactures a full size range of scuba cylinders from 6 to 80 cubic feet using the 6061-T6 aluminum alloy.

 

General Cylinder Information, Safety and Warnings 

READ ALL WARNINGS PRIOR TO FILLING OR USING WORTHINGTON SCUBA CYLINDER. FAILURE TO READ AND UNDERSTAND ALL WARNINGS CAN RESULT IN EXPULSION OF THE PRODUCT OR RUPTURE OF THE CYLINDER RESULTING IN PROPERTY DAMAGE, SERIOUS INJURY, OR DEATH.

 

  • Never overfill this cylinder beyond its rated service pressure.
  • Only use equipment rated for the cylinder pressure.
  • Never fill the cylinder if it has not been hydrostatically tested within the last five years.
  • Never fill the cylinder if a visual inspection has not been performed within the last year.
  • Never store this cylinder in temperatures greater than 125o F (52o C).
  • Never expose cylinder to caustic paint strippers or corrosive cleaners.
  • Never expose cylinder to flames, ovens, driers or other sources of heat.
  • This cylinder was cleaned for oxygen and oxygen-enriched service at the factory. If you intend to use this cylinder for oxygen or oxygen-enriched service (i.e. with any gas containing oxygen concentrations of 23.5% or more), all components used with the cylinder must be oxygen compatible. It is the responsibility of the cylinder user to ensure that the cylinder and all components are maintained in a proper state of oxygen cleanliness in strict accordance with regulatory requirements and industry standards.
  • Keep oil and grease away from cylinder and valve.
  • Close cylinder valve when cylinder is not in use or when empty.
  • Keep out of reach of children.

 

6351 Aluminum Cylinders

  • Worthington Cylinders has never produced cylinders from 6351 aluminum alloy.
  • Cylinders manufactured with 6351 aluminum alloy require special attention as mandated by the DOT, 49CFR and CAN/CSA B339-02.Paint Removal & Repainting
  • Worthington Cylinders does not recommend the removal of paint or repainting of Aluminum scuba cylinders. If not completed properly either process can result in the change of mechanical properties, jeopardizing the integrity of the cylinder.

 

 Oxygen Compatibility

  • All Worthington scuba cylinders are cleaned for oxygen and oxygen-enriched service at the factory. If you intend to use a cylinder for oxygen and oxygen-enriched service (i.e. with any gas containing oxygen concentrations of 23.5% or more), all components used with the cylinder must be oxygen compatible. It is the responsibility of the cylinder user to ensure that the cylinder and all components are maintained in a proper state of oxygen cleanliness in strict accordance with regulatory requirements and industry standards.
  • DOT mandates strict pressure limit. Gas pressure in an aluminum cylinder containing enriched or pure oxygen (oxygen concentration of 23.5% or more) must never exceed 3000 psi (see CFR 49). Worthington cylinders marked for 3300 psi are included and can not be charged with oxygen enriched air above 3000 psi as mandated by the DOT.

 

Worthington Aluminum Cylinder Specifications

Metric* 

In Sea Water 
with Valve

AL06

AL08

AL13

AL19

AL30

AL40

AL50

AL63

AL72

AL80

AL80
Neutral 80

AL100

Service Pressure

207 bar

139 bar

207 bar

207 bar

207 bar

207 bar

207 bar

207 bar

207 bar

207 bar

228 bar

228 bar

Water Volume

0.8 liters

1.5 liters

1.9 liters

2.6 liters

4.2 liters

5.8 liters

7.2 liters

9.0 liters

10.4 liters

11.1 liters

10.0 liters

12.9 liters

True Capacity

170 liters

215 liters

377 liters

538 liters

850 liters

1133 liters

1444 liters

1784 liters

2038 liters

2192 liters

2192 liters

2866
liters

Buoyancy - Full

-0.8 kg

-0.7 kg

-0.9 kg

-0.9 kg

-0.9 kg

-0.7 kg

-1.2 kg

-1.5 kg

-0.8 kg

-0.8 kg

-2.3 kg

-2.5 kg

Buoyancy 
(500 psi)

-0.6 kg

-0.9 kg

-0.6 kg

-0.3 kg

-0.05 kg

0.4 kg

0 kg

0.2 kg

1.3 kg

1.5 kg

0 kg

+0.4 kg

Weight Empty

1.2 kg

1.7 kg

2.7 kg

3.6 kg

5.6 kg

6.9 kg

9.8 kg

12.3 kg

12.6 kg

14.4 kg

15.2 kg

19.1 kg

Outside Diameter

81.3 mm

111 mm

111 mm

111 mm

133 mm

133 mm

175 mm

184 mm

175 mm

184 mm

184 mm

203 mm

Cylinder Length

277 mm

274 mm

323 mm

438 mm

495 mm

633 mm

492 mm

556 mm

660 mm

663 mm

645 mm

667 mm

                                                                                                                                  

 

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.

0 Review(s)